Jump to content

Cowcatcher

From Wikipedia, the free encyclopedia

Cowcatcher of an American 1911 Baldwin steam locomotive at the Texas Transportation Museum
Leading truck and cowcatcher on the John Bull
Pilot of a modern Indian locomotive class WAG-9
Lifeguard (circled) on a UK HST powercar

A cowcatcher, also known as a pilot, is the device mounted at the front of a locomotive to deflect obstacles on the track that might otherwise damage or derail it or the train.

In the UK, small metal bars called life-guards, rail guards or guard irons are provided immediately in front of the wheels. They knock away smaller obstacles lying directly on the running surface of the railhead. Historically, fenced-off railway systems in Europe relied exclusively on those devices and cowcatchers were not required, but in modern systems cowcatchers have generally superseded them.[citation needed]

Instead of a cowcatcher, trams use a device called a fender. Objects lying on the tram track come in contact with a sensor bracket, which triggers the lowering of a basket-shaped device to the ground, preventing the overrunning of the obstacles and dragging them along the road surface in front of the wheels.

In snowy areas the cowcatcher also has the function of a snowplough.

Invention

[edit]

An idea for a cowcatcher was proposed by Charles Babbage in 1830, during his period of working for the Liverpool and Manchester Railway.[1] However, Babbage's invention was not constructed, and it is uncertain whether later manufacturers were aware of Babbage's idea.

The first practical cowcatcher is widely credited to Isaac Dripps, who fitted one to the John Bull (locomotive) in 1833 [2] shortly after steam haulage commenced on the Camden and Amboy Railroad. His design is described and illustrated in David Stevenson's book Sketch of the Civil Engineering of North America, published in 1838.

Design

[edit]
Old Timers at the Lake Superior Railroad Museum, Duluth, Minnesota

On a mainline locomotive, the cowcatcher has to successfully deflect an obstacle hit at speed. The design principle is to push the object upwards and sideways out of the way and not to lift the locomotive on impact.

The typical shape is a blunt wedge with a shallow V-shape in plan. In the later days of steam locomotives, the front coupler was designed to swing out of the way also, so it could not get caught up; this was called a 'drop coupler pilot'.

Early on, cowcatchers were normally fabricated of bars mounted on a frame; later on, sheet metal cowcatchers were often used for their additional smoothness, and some cast steel cowcatchers were employed for their mass and smooth shape. Early diesel locomotives followed the same plan.

Cowcatchers on early switcher locomotives in the US often had steps (called "footboard pilots") to allow yard workers to ride with the locomotive. In some countries, footboard pilots are outlawed for safety reasons, and have been removed. Modern locomotives often have front and rear platforms with safety rails, or deeply recessed steps, where workers can ride.

Modern cowcatchers

[edit]

Most modern European rail vehicles must have cowcatchers with a snowplough function and rail guards. The required strength of the system is 30 kN (6,700 lbf) in the middle of the track and 50 kN (11,000 lbf) near the rails.[3]

Modern US diesel locomotives have flatter, less wedge-shaped cowcatchers, because a diesel locomotive has the cab near the front, and the crew are vulnerable to impact from obstacles pushed up by the cowcatcher.

Anti-climbers

[edit]
An anti-climber on the front of an Australian NR class diesel locomotive

To protect the crew and passengers, most modern locomotives have a horizontally grooved steel beam known as an anti-climber fitted across the front, above the coupler. Its purpose is to prevent colliding locomotives from riding up and moving over the locomotive frame through the cab.

See also

[edit]

References

[edit]
  1. ^ Hyman, Anthony (1982). Charles Babbage: Pioneer of the Computer. Oxford University Press. pp. 142–143. ISBN 0-19-858170-X. Babbage suggested to Hodgson of the railway company what was later to be called a 'cow-catcher' for sweeping obstacles off the line.
  2. ^ White, John (1979). A History of the American Locomotive. Dover Publications. p. 211. ISBN 9780486238180.
  3. ^ "§ 41 Bahnräumer und Schienenräumer". Verordnung über den Bau und Betrieb der Straßenbahnen (Straßenbahn-Bau- und Betriebsordnung - BOStrab). (in German). 2008-11-07. Retrieved 2009-03-29.

Further reading

[edit]
  • "Notes and News: Pilot Engines, Past and Present". The Railway Magazine. Vol. 91, no. 556. Westminster: Railway Publishing Company. March–April 1945. pp. 117–118. - describes seven other meanings of the word "pilot" historically used on Britain's railways.
  • "Hubris and the Cowcatcher by John H. White Jr". Railroad History (215). Pflugerville, Texas: Railway & Locomotive Historical Society: 86–91. Fall–Winter 2016. - describes Lorenzo Davies, alleged inventor of the cowcatcher.